Decal overlays for your stock Emblems. $5.00 for the set of (2) shipped in regular colors, $7.00 shipped for Carbon, and Etched. I have: Red, White, Blue, Dk Blue, Black, Charcoal, Silver, Green, Brown, Pink, Purple, Orange, Yellow, Gold, Burgundy, Turquiose, Carbon fiber, Carbon Fiber II, Copper, Etched Glass. These go directly over your stock emblem, and change the color of the stock emblem as shown in the pictures below. I take paypal at:ryan@flamingdecals.com.

_________________
http://www.flamingdecals.com

Couple of questions.

Do you position the part of the decal you want to transfer over the badge and rub it on?

If I do not like the way it looks is the decal easily removed?

_________________

2004 SLE Crimson Tintcoat with Dark Pewter Interior. Mods so far: Wood Dash Kit-Window Tint-CATZ Fog/Driving Lights
Custom Fabricated Stainless Steel Mesh Grill-Painted Calipers-3rd Brake Light Decal-Strut Tower Brace.INTENSE™ Level 1 L36/L26 Performance Package, Intense Shift Kit. ZZP ER Rockers and a HV3. L76 springs
COTM April 2007

These are self adhesive vinyl decals. They will be shipped as one decal that you can apply over the entire badge. Most people cut the letters apart so it is easier to line up. The decal itself has a layer of clear transfer tape applied to it. You remove the decal with the transfer tape, apply to your emblem, press down on the decal, and remove the transfer tape. If you don't like it, yes, they are removable, but not reusable. Sometimes, depending on how long you leave it on, you will have to remove some adhesive residue. This can be done with adhesive remover, WD40, or with Goo Gone. Some people have removed their emblems, applied the decals, and then clearcoated them. This can be done with light coats in order to make them last longer and look more like a factory applied decal. Most of the vinyl is rated for 6-8 years, but that will vary based on your enviroment. Cold, Salt, Sunlight will decrease the life of any decal.

_________________
http://www.flamingdecals.com

Hey ryan...you can use my image ...if you need it.
Dan

_________________
1997 SSE - Bright White -Gutted box, Overlays, GTA vents, cleared corners, calipers..so far.

Can you make decals to fit the "Bonneville" indents in the rear bumper?




I think decals would look better and last longer than hand painting in there, although it is a curved surface isn't it.

_________________

2001 F150 a basic six cyl with 5 speed manual trans.
'66 Piper Cherokee 360 CID , 180 hp, 155 mph @ 2500 rpm, drop in K&N filter.

Any chance on pre-cut strips for the window sills on 00+. I can send measurements if you'd like.

_________________
Formerly 95seand78z28

2001 SSEi (L67Heaven) - Swooped, Pullied, Cleared, and Tinted -GONE!
2014 GMC Sierra SLT.

If you have measurements, sure, I can cut them.

_________________
http://www.flamingdecals.com

I don't have the size for them.. I could though if I had some sort of template. It's a standard font.

_________________
http://www.flamingdecals.com

If you can find the size and make me a set I'll buy them at the same time as the club decals.
Must be a Bonneville of the right vintage somewhere close by to get some measurements from.

_________________

2001 F150 a basic six cyl with 5 speed manual trans.
'66 Piper Cherokee 360 CID , 180 hp, 155 mph @ 2500 rpm, drop in K&N filter.

I could probably go to the mall and find one, but I don't think people like me taking templates of there bumpers in the parking lot.. If someone could do a rubbing of it, and mail it to me... that would work.

_________________
http://www.flamingdecals.com

My other car is a '06 Trailblazer LS . I'd really love the red overlay for that emblem.

_________________

Check my website.... under -Trailblazer Decals.

_________________
http://www.flamingdecals.com

The Bowtie overlays are cool....I'll probably pick those up. On the rear hatch is

Trailblazer
LS

Got anything for that?

_________________

That's just a flat emblem on that one I think... hard to cover it any and make it look right. I would just suggest ripping off the LS part.

_________________
http://www.flamingdecals.com

So you're saying there's a "Trailblazer" overlay. I didn't see that on your site. Link?

_________________

No, there is not. Hard to cover since it's flat. Normally when you do an overlay there is some border to what you are covering. That's just a all chrome emblem.

_________________
http://www.flamingdecals.com