mine started that way.

Yes, it was the left bearing and this time I got the bearings with the 3 year warranty, Thanks for the help. ( only took 40 min thats good for me, but I did break my brothers breaker bar.)

I cant remember the brand, but it's been around 65,000 miles. In the past 6 months I've replaced the mass air flow sensor, cat converter, o2 sensor, 2 coil packs, coolent elbows, fuel filter, brakes, battery and I guess the hub bearings and my compressor will be next. Hope this will do it for a bit ...

I have a 2005 Bonneville SE that is making a roaring noise and a humming noise that stops when I turn left and starts back as soon as I finish the turn. It has been doing this since yesterday. I had the hub bearings replaced in March of 2011, could it be the hub bearings again?

Replace the lights, will not take that long. Had to do mine.

The compressor/clutch does not lock up when the ac is turned on, and it has plenty of freon. I figure it cant hurt to try the switch before I go to the junk yard for a compressor. Thanks for your help!

Head Gasket !

Would a low pressure switch keep the compressor from working on a 05 Bonneville; and where is it and how hard to change? Any help would great!

P0102 Mass or volume air flow and Circuit low input, A new MAF was installed. This is the same code that was showing before. (This time the car is still running ok) but before, after 100 miles or so it would act like you took your foot off the gas and a little while after that it would stop running ...

I have a 2005 Bonneville Se and the service engine light keeps comming back on, it showed that I had a bad mass air flow sensor so i replaced the sensor and the air filter as well and checked for any leaks, well that worked fine for about a 100 miles and the the car started shutting off again. The ...

The service engine light keeps comming on telling me that the mass air flow sensor is bad, I have replaced the air filter, mass air flow sensor and the fuel filter. ( The light went out when I replaced the sensor, but came back on the the next day. I replaced the fuel filter and reset the computer ...