Hey guys,
I'm trying to find some very good tutorials on some things. The air bag light on during cold weather gremlin, instrument cluster light replacement and mods, light for the fog light switch, and finally the light for the floor shifter.

Any links for these would great.

It just leaks when it stops circulating. I just order an OEM cap since I have an aftermarket on it now.

So I had the coolant flushed from my '03 Bonnie SE and there is coolant leaking from the cap. The cap is new and it would do this with old coolant and cap. Any thoughts on how to solve this?

Hey guys,
Today my windows were acting funny. I could control the back windows and the mirrors with switch, but the passenger side I could only roll down and the driver's side the opposite. Also the driver's side rolled itself down when I started it and at times it seemed like someone was messing ...

Hey guys,
Today my windows were acting funny. I could control the back windows and the mirrors with switch, but the passenger side I could only roll down and the driver's side the opposite. Also the driver's side rolled itself down when I started it and at times it seemed like someone was messing ...

How much do those run and how is the strength and flexibility afterwards?

Just wondering if anyone has used the 3m or any other plastic bumper repair kits on a bumper cover. I would like to know if it is worth getting so I can save some money due to some bonehead putting their ball hitch through my cover and not leaving any info.

I've been looking at the Lokar products, would one fit from a 4L65e? What the difference between a 4T65e and a 4L65e besides one is a FWD tranny and the other is a RWD?

Hey guys,
I have been looking for a replacement filler tube for my 03 SE. I haven't had any luck online or going to the local dealership. The dealership said that it is discontinued and they said that only a Buick LeSabres or Park Avenue are only other models that share the same tube. My question is ...

thanks for the info. I like the life on the bulb. I may use that for the button lights. I still wanna try the LED strips for at least the LCD display.

are the 2000-2005 slightly different with the wiring to the radio or the same?

well i figured out the problem. someone had to rewire the parking lamps and they used a wire from the headlamps instead of the parking lamps.

I'm surprised no one has done it. I'll probably give it a shot after the Taurus is done at the body shop (walmart parking lot ). the good thing about the strips is they have resistors already in them.

would it be possible to solder in a led strip behind the lcd and buttons? http://www.alpena.ca/category.aspx?catid=31

could i piggy back off the drivers side?

i'll take some pics today.

Okay see what is bent. My hood can't be adjusted any more to the drivers side. The body line is off about 1/4 inch

I know I asked this before on a different section but I figure I would post it here where it belongs.

My issue is my right front parking light doesn't come on with the other lights when the switch is turned to parking lamps, but it will turn on with headlights on. The turning signal works as well ...

I have a bumper cover that isn't lining up with the hoods center body line. I was wondering if I have to adjust the header panel to adjust this.