Yes. There still is a little movement and slightly rough shifting. I replaced the right side mount this week. I didn't realize that the engine hangs off the 2 side mounts. It helped a little more. I will replace the lesft side trans mount next week then the rear center trans mount. I suspect the ...

While the new trans mount made a big difference, it still feels a little "soft" compared to 4 years ago when the car had 45000 miles. Now it has 102000 and I just think that after 15 years the mounts probably should be replaced.

I"ve read a number of posts about the dual zone A/C problems but they all seem to have the opposite problem I have. Can anyone point me to a solution for my situation and which actuatore controls the passenger side?
Thanks

Hi All. I just replaced the front left Trans mount on my 2001 Bonnie because it was trashed and the engine was bouncing around. Luckily that is the easy one. Now I am planning on replacing the other 3 mounts. My question is can I do them one at a time or should I do all at the same time. And is ...

Hi All. I can't find anything on the site. I have had my A/C system apart for a few years and now I don't remember which seals go on which parts. Can anyone help?

Hi all. I have read everything I can find on the subject and I cant get the warning to go away on the DIC. I put my scanner on the car and under ABS codes it says Low pressure detected. I tried to erase the code but it wont erase. Any suggestions? TIA

Hi all. I noticed that there seems to be a fitting below the filler neck on the front of the tank of my radiator and water is pouring through it. Was there a plug in there? Possibly the temp sensor? I can't see anything that looks like it belonged in there

I am smelling a burning odor through my vents in m y 2001 Bonnie. The only thing I can think of is the blower motor. Has anyone got any experience with this? Is there a tutorial on how to remove blower?
TIA

Hi all. I just replaced the radiator in my 2001 Bonnie and now the upper cooler line is pissing trans fluid at the fitting. It's a quick connect fitting with a spring clip in the fitting and a conical taper on the line with a yellow O ring looking thing behind the taper. I am wondering if there is ...

Hi all. It looks like I have a leak in the right front of my Bonnie. I suspect a radiator tank. While looking for replacements, they ask if it has a low coolant light. I have never seen that light on my IP. Do I have one? Also want to make sure that it's a one row. TIA

Hi all. I was looking for a pre made set of braided lines for my 2001 Bonnie. Russell has a part no. 692220 that says it fits the Impala and the Grand Prix but no mention of the Bonneville. Does anyone know if there is a difference? Isn't the Impala basically the same chassis? TIA

Hi all. Just wondered if any one makes a kit for 2001 Bonnie. Is the kit for the Impala the same one? Saw a kit for Grand Prix but not sure if it's the same. Can anyone help?
TIA

Yes. I bought mine from Amazon, Best price I could find. They do have an infrared coating hence the HIR in the designation, And they are standard 55 watt bulbs. Next I am going to disable the DRL so they will last a little longer.

engine was off

http://i1236.photobucket.com/albums/ff445/raa1144/stock_1.jpg

http://i1236.photobucket.com/albums/ff445/raa1144/philipshir2_1.jpg

Hi All. I just replaced my stock 9006 low beams with the new Philips HIR2 (halogen infrared 9012) bulbs. Had to trim one of the tabs, but otherwise they are a ...

i have a bad leak where the rubber fuel line connects to the injector rail. Is there a repair kit or do I need a new fuel line and where can I get it.
Thanks

I want to have a new stereo/gps unit installed. Any recommendations?

I am trying to add some r134a to my 2001 bonnie. Both of the caps are on what looks like the high pressure side. Only one fits ( the one c;loser to the firewall) but I'm still wondering if there is another valve somewhere else on the low pressure hose. Can anyone help?

I have a loud groan from the rear brakes when in reverse. Anyone got any suggestions to fix this. The car is a 2001 Bonnie SLE with 60k miles. I think the rears are original.

Hi all. Recently got a 2001 Bonnie and wanted to verify that the only real leather is the seat faces. Looks to me that evrything else is vinyl. The only question I have is the steering wheel. How do you detail it without making it slippery?
TIA