well after doing the plugs and wires its still doing the same thing, my friend thinks it could be the maf,so hes gonna take it out and clean it and ill let you know

Im gonna do plugs and wires this weekend and was wondering which ones to get.I usually get the Ac Delcos but I see they are $7 each and money is a little tight right now and I also see that the autolites 606 are $2 each,I know not to get the bosch's but I never heard anything about the autolites ...

yep,on hot days when i leave my windows up the gauge will stick in certain plaes,sometimes it wont move at all or it will read half tank when i know its full or it will get stuck when i shut the car off so when i restart it will do the sweep and go so far that it hits the outer rim on the speedo ...

nope havent touched them

Hey,I gotta 04 Bonneville with 106,000 miles on it.Just this week I noticed that ONCE THE CAR GETS FULLY HOT the engine will skip a beat so to speak for a second but will keep running. As the car keeps running it does it more frequently.When it does this at idle the Rpm drop for a split second and ...

A recap....When shifting my car into gear,I feel it pretty good.Its alot more noticealbe when going into reverse.Also it takes longer than normal to actually shift into gear once the gear is selected on the shifter.You guys had said before that I need a tranny mount,I went onto napa to check prices ...

At the place where I worked,the new guy did an oil change on an import that had "internal" filter where you unscrewed the filter housing and just changed the filter element itself.Well there is a plastic tube like piece that goes on the inside of the filter,YEAH HE THREW THAT AWAY!!Needless to say ...

Jack car up,make sure it is supported by jack stands NOT the jack
remove tire
remove brake caliper,get a wire hanger and bend it so you can hang the caliper from the spring without letting the brake line strech VERY IMPORTANT!!
remove rotor
remove the huge nut that in the center of the hub
MAKE SURE ...

Or,with the car in the air and in neutral you can spin the tire and hold the spring in your hand and you can actually feel the "grating" of a bad bearing,compare both sides and one side will feel noticeably smoother.Or,while driving,lets say your passenger side is bad,if you swerve the sound the ...

IIRC,the teeth on the hub spin around a magnet which creates a DC voltage signal that the PC reads.It looks at the "off" part of the signal to determine wheel speed,so if there is no signal at all,ABS no longer works.

Wow,where I worked,we did them for around 240 out the door.Napa sells the hub for $95 bucks CUSTOMER PRICE,now if you throw in the discount the shop gets(in my experience its usually 40-50%) and the one hour labor,THEY ARE ADDING ALMOST $200 TO THE PRICE OF THE PART!!I say find a new shop,preferably ...

Long story short,the tranny looks at certain things to determine its shift points,such as the load on the engine(how far your foot is down),because the engine wasnt running right,you had to put your foot down further in order to get some type of acceleration outta the thing which makes the tranny ...

everytime,im thinking it might be the mount because I can feel it pretty good through the car when it goes into gear,especially reverse

BTW,where can I get the trans tune from?Any national chains carry it,or is it an internet thing?

2004 SE,with99000mi.I read the posts on the sending unit fix,but my gas gauge doesnt exhibit those exact symptoms.When I first bought the car it was stuck on 1/4 of a tank.I filled it to almost full drove it home and parked it,then the next day it read slightly less than 3/4 of a tank.The dealer ...

I noticed that almost right after I start my car,there is a humming noise coming from the rear of the car,almost as if it has ride control.Is that what it is,or is it something else?It only lasts maybe 10 seconds or so,then it turns off.

Thanks guys,will try

I have had good luck using napa rotors,on cars with drum brakes,making sure they are adjusted is criticle to NOT warping the front rotors,also at the shop I worked at,it was not uncommen to get warped rotors straight outta the box.Also make sure you use new pads with new rotors and when changing the ...