Who runs what? I have a ssic but want more. I just don't think i have the hood space for much more.

_________________

2001 SSEi | Galaxy Silver | GenV supercharger P&P | Intense 3.2 MPS | Intense FWI 4"| Custom PCM | TOG Ceramic headers | Magnaflow 3" cat | 180° stat | Aeroforce scan gauge | PRJ plug wires | PRJ fuel rails | Silicone vacuum lines| AP103 plugs | 3.2 MPS | 42.5# injectors | Intense 1x cam kit | YT 1.8 Rockers | 105# springs | Meziere HD pump | N* Tb | 185mm MAF | 2" Phenolic Intercooler | Oil pressure kit | L32 short block | 5% overdrive SFI Balancer | L67 heads custom ported | EBC USR Rotors | EBC Red stuff pads | Custom HID Fog lights, with HI-beam over ride | Polyurethane motor mount | Energy Suspension end links | GXP Shocks/Struts | Custom Drop springs Front, Rear FE5 Springs | GXP Strut tower Brace | GP GXP 18x8 Rims | Polished Exhaust tips | Triple Edge High Performance Street/Strip 4T65E-HD |

I think the 2.25" core fits fine uner out hood. To be sur just use some plumbers dope or modeling clay on top of the blower ro see how much room there is.

In the meantime, gimme your ssic!

_________________
02 SSEi-Turning money into tire smoke, very efficiently.

With the Gen V there does not look like there is room. There is about 1/2 inch of clearance now.

_________________

2001 SSEi | Galaxy Silver | GenV supercharger P&P | Intense 3.2 MPS | Intense FWI 4"| Custom PCM | TOG Ceramic headers | Magnaflow 3" cat | 180° stat | Aeroforce scan gauge | PRJ plug wires | PRJ fuel rails | Silicone vacuum lines| AP103 plugs | 3.2 MPS | 42.5# injectors | Intense 1x cam kit | YT 1.8 Rockers | 105# springs | Meziere HD pump | N* Tb | 185mm MAF | 2" Phenolic Intercooler | Oil pressure kit | L32 short block | 5% overdrive SFI Balancer | L67 heads custom ported | EBC USR Rotors | EBC Red stuff pads | Custom HID Fog lights, with HI-beam over ride | Polyurethane motor mount | Energy Suspension end links | GXP Shocks/Struts | Custom Drop springs Front, Rear FE5 Springs | GXP Strut tower Brace | GP GXP 18x8 Rims | Polished Exhaust tips | Triple Edge High Performance Street/Strip 4T65E-HD |

There are very few people on this forum that run IC's, and even fewer who post regularly (I personally don't know of anyone really who posts often on here). I think if you're out of hood clearance you're kind of stuck with what you have or another custom setup that doesn't go any further up.

_________________
Bye Bye:

RIP sandrock

I don't recall the GenV being any taller, and I've rebuilt a few. The Gen3 fuel rail fits it fine. That should be the indicator. Get some Play-Doh and find out how much room you have left. And find out lust how much vertical height that core requires, depending on the IC design, it may not be the same as the thickness of the core depending on how it's mounted in the IC plates.

_________________

Click here for mod list for both cars
93 SSEi, 95 SLE (supercharged) 97 Buick LeSabre Limited
PontiacDad at WCBF '04: Cruise control? That's like surrendering!
Comprehensive guide to troubleshooting, rebuilding, and modifying Eaton Superchargers

I just looked at it again and it looks like there is just enough clearance above the supercharges, but not above the TB and the TB adapter. Would a N* tb work better?

_________________

2001 SSEi | Galaxy Silver | GenV supercharger P&P | Intense 3.2 MPS | Intense FWI 4"| Custom PCM | TOG Ceramic headers | Magnaflow 3" cat | 180° stat | Aeroforce scan gauge | PRJ plug wires | PRJ fuel rails | Silicone vacuum lines| AP103 plugs | 3.2 MPS | 42.5# injectors | Intense 1x cam kit | YT 1.8 Rockers | 105# springs | Meziere HD pump | N* Tb | 185mm MAF | 2" Phenolic Intercooler | Oil pressure kit | L32 short block | 5% overdrive SFI Balancer | L67 heads custom ported | EBC USR Rotors | EBC Red stuff pads | Custom HID Fog lights, with HI-beam over ride | Polyurethane motor mount | Energy Suspension end links | GXP Shocks/Struts | Custom Drop springs Front, Rear FE5 Springs | GXP Strut tower Brace | GP GXP 18x8 Rims | Polished Exhaust tips | Triple Edge High Performance Street/Strip 4T65E-HD |

IIRC ZZP makes a turndown for the GTP's with the Gen V.

_________________
Bye Bye:

RIP sandrock

how large is the aftercooler? may be a worth while upgrade to add a larger aftercooler and a higher volume pump for your existing IC if hood clearance is an issue. the SC cobalt guys run mustang SVT cobra aftercoolers as a cheap upgrade. just a thought

Shane

_________________
Shane "RedZMonte"
2004 Z16 Z06: Virgin
2000 SSEi: Kenwood DDX512, 3.25" MPS, ZZP DP, PLog, Puck Mount, NGK TR7's, DHP Tuned
1995 Monte Z34: T04e "60" turbo, 42.5# injectors, Borla Catback, OBDII swap, DHP Tuned, Much more...