It is currently Thu Mar 28, 2024 8:01 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Bad ICM?
PostPosted: Thu Mar 15, 2018 10:16 pm 
Offline
Posts like an L36
Posts like an L36
User avatar

Joined: Sun Jan 01, 2012 7:38 pm
Posts: 1008
Location: Morris, IL.
Year and Trim: 2003 Bonneville SSEI
My wifes 02 regal stalled out the other day, it would start up then die out immediately so, had it towed home. When I got home after work it started rite up and I took it for a ride for maybe 3 miles at operating temp, ran great. Half hour of so I went back out to start it up and did the same stall out thing, if I held the pedal down some when cranking it would run but, pretty roughly. Took the ICM to local auto parts who could test it but, found nothing bad with the module only it was cold and a hot engine seems to set the problem off. Is this the symtom of a bad ICM?


Top
 Profile  
 
 Post subject: Re: Bad ICM?
PostPosted: Fri Mar 16, 2018 3:00 am 
Offline
Posts like a Northstar
Posts like a Northstar

Joined: Sun Aug 22, 2010 11:11 pm
Posts: 1813
Location: Ontario, Canada
Year and Trim: 2000 Bonniville SSEi L67
first try unplugging the Maf . See whats changed.

_________________
poverty forces one to do unorthodox things

2000 SSEi
past rides:
1996 SSEi
1992 GTP
1987 Grand Am


Top
 Profile  
 
 Post subject: Re: Bad ICM?
PostPosted: Fri Mar 16, 2018 5:20 pm 
Offline
Posts like an L36
Posts like an L36
User avatar

Joined: Sun Jan 01, 2012 7:38 pm
Posts: 1008
Location: Morris, IL.
Year and Trim: 2003 Bonneville SSEI
it's not ICM, just swapped out the one from my ssei and it is doing the same thing, stalls out. I'll check out the maf


Top
 Profile  
 
 Post subject: Re: Bad ICM?
PostPosted: Fri Mar 16, 2018 5:28 pm 
Offline
Posts like an L36
Posts like an L36
User avatar

Joined: Sun Jan 01, 2012 7:38 pm
Posts: 1008
Location: Morris, IL.
Year and Trim: 2003 Bonneville SSEI
ok, unplugged the MAF and it idles and am able to rev engine. Letting it run and will go back and check it in 10 minutes or so. If it is bad where do I get those weird screw driver bits?


Top
 Profile  
 
 Post subject: Re: Bad ICM?
PostPosted: Fri Mar 16, 2018 6:19 pm 
Offline
Posts like a Northstar
Posts like a Northstar

Joined: Sun Aug 22, 2010 11:11 pm
Posts: 1813
Location: Ontario, Canada
Year and Trim: 2000 Bonniville SSEi L67
deano55 wrote:
ok, unplugged the MAF and it idles and am able to rev engine. Letting it run and will go back and check it in 10 minutes or so. If it is bad where do I get those weird screw driver bits?


its torx tamper proof - I get some 100 sand paper and take down the centre 'nipple' - then you can get a hex key to work.

you cant go hard with maf unplugged - keep rpm under 2500

_________________
poverty forces one to do unorthodox things

2000 SSEi
past rides:
1996 SSEi
1992 GTP
1987 Grand Am


Top
 Profile  
 
 Post subject: Re: Bad ICM?
PostPosted: Fri Mar 16, 2018 6:48 pm 
Offline
Posts like an L36
Posts like an L36
User avatar

Joined: Sun Jan 01, 2012 7:38 pm
Posts: 1008
Location: Morris, IL.
Year and Trim: 2003 Bonneville SSEI
deano55 wrote:
ok, unplugged the MAF and it idles and am able to rev engine. Letting it run and will go back and check it in 10 minutes or so. If it is bad where do I get those weird screw driver bits?
double checked things again, runs when unplugged and dies when I plug it back in, went to O'reillys to purchase one but, it was nearly double the price as Amazon, I'll wait till Monday to save 60.00. Thanks alot for your help


Top
 Profile  
 
 Post subject: Re: Bad ICM?
PostPosted: Fri Mar 16, 2018 7:20 pm 
Offline
Posts like a Northstar
Posts like a Northstar

Joined: Sun Aug 22, 2010 11:11 pm
Posts: 1813
Location: Ontario, Canada
Year and Trim: 2000 Bonniville SSEi L67
you can clean the maf with maf cleaner - that may be all you need.

_________________
poverty forces one to do unorthodox things

2000 SSEi
past rides:
1996 SSEi
1992 GTP
1987 Grand Am


Top
 Profile  
 
 Post subject: Re: Bad ICM?
PostPosted: Fri Mar 16, 2018 9:01 pm 
Offline
Posts like an L36
Posts like an L36
User avatar

Joined: Sun Jan 01, 2012 7:38 pm
Posts: 1008
Location: Morris, IL.
Year and Trim: 2003 Bonneville SSEI
96 SSEi wrote:
you can clean the maf with maf cleaner - that may be all you need.
I had some of that cleaner, did nothing. The new one should be here Monday


Top
 Profile  
 
 Post subject: Re: Bad ICM?
PostPosted: Fri Mar 16, 2018 11:50 pm 
Offline
Posts like a Northstar
Posts like a Northstar

Joined: Sun Aug 22, 2010 11:11 pm
Posts: 1813
Location: Ontario, Canada
Year and Trim: 2000 Bonniville SSEi L67
wife will be happy

_________________
poverty forces one to do unorthodox things

2000 SSEi
past rides:
1996 SSEi
1992 GTP
1987 Grand Am


Top
 Profile  
 
 Post subject: Re: Bad ICM?
PostPosted: Mon Jul 02, 2018 7:39 am 
Offline
Posts like an L36
Posts like an L36
User avatar

Joined: Sun Jan 01, 2012 7:38 pm
Posts: 1008
Location: Morris, IL.
Year and Trim: 2003 Bonneville SSEI
forgot to reply, thanks for the help, that was the problem. Runs like a champ again, now to get dads car running good


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group


phpBB SEO