Hi folks-

I am unfamiliar with many terms used in regards to electronics in the factory service manual.
Trying to test for voltage present at the ABS fuses under the hood. The manual says measure voltage by probing
between the fuse test terminals and a good ground. Good ground I understand but does that mean the fuse connection terminals themselves or somewhere else in the underhood fuse panel? Thanks in advance!

The fuses have exposed metal at the top that you can probe without removing the fuse itself. I'm pretty sure that's what they mean.

I usually power probe both sides on the top of each fuse vs. removing them to check for a blown one. It's quicker.

_________________

95 SLE... a keeper. 241k miles. Low and Slow.
97 BMW 528i
98 Infiniti vq35'd i30: 13.3@104mph, 30MPG Hwy (RIP)
02 Jag X-type
03 BMW M5
05 Chevy Cobalt LS
07 Infiniti G35s 6MT (Sold)
07 Ducati Monster S2R 800 with DS1000 swap
83 Yamaha IT175K
72 Yamaha DS7: '74 RD250 swap, JL chambers

Info on dropping a 92-99: Here.

Sounds good, thanks.