Looking at wheels and found some but they are all in the 24mm to 30mm offset. I'm not a fan of how far the stock wheels sit inside the fenders so I'm curious if those offsets will make it sit right. My car will not be lowered. Anyone have any pics? 3/4 shot, head on rear and front shots would be best.

_________________
HD intake / DHP / 3.25 / 1.9s / ported m90 / HVtb / PEMs / downpipe / 3 inch catback

Offset is a function of rim width. The same offset on a 7" vs. an 8" will be different.

_________________

95 SLE... a keeper. 241k miles. Low and Slow.
97 BMW 528i
98 Infiniti vq35'd i30: 13.3@104mph, 30MPG Hwy (RIP)
02 Jag X-type
03 BMW M5
05 Chevy Cobalt LS
07 Infiniti G35s 6MT (Sold)
07 Ducati Monster S2R 800 with DS1000 swap
83 Yamaha IT175K
72 Yamaha DS7: '74 RD250 swap, JL chambers

Info on dropping a 92-99: Here.

18x9

_________________
HD intake / DHP / 3.25 / 1.9s / ported m90 / HVtb / PEMs / downpipe / 3 inch catback

18x9 may fit. When I was looking into 20x9 with an offset of 38-40 those would have slightly stuck out. Family member of mine ran 255\35\20 tires on his GXP and they stuck out a little. I have 245\40\20 and mine sit inside the fender.

You may have clearance issues if you go with a lower offset, so be mindful of that. I think 255 is the widest you can go but I'm not sure.

_________________