I live in Iowa and I would like to know if there are any laws that say you have to have amber reflectors on the ends of your vehicle...

Also..

I know it's possible to do the front but what about the back?

ALSO...

What's the second best place (besides EBay) to look for CC's..

ALSO!!!...

if anyone from iowa lives close to Auto Toyz, do you know if they do CC's?

_________________
1998 Pontiac Bonneville SE - ? Horsepower / ? Torque
Current: 0-60 in 9 seconds
Goal: 0-60 in 8.5 // 1/4 Mile 15.5
My Bonneville (Updated)
Black Revolt

Only place I have seen for the clear corners is custom (removing the amber part yourself) or from eBay, at least for the '92-'95 CCs. I can't say I paid attention or recall seeing anything anywhere else for the '96+.

As far as the laws go you either have to have an amber bulb or amber lenses. Newer cars seem to be more frequently having clear lenses and amber lights. As long as something is amber/yellow.

I'm sure the rear is possible. I assume you'd just need to pop open the light housing and remove the amber lens. I don't know of anyone having done that on a '96-'99 and its unlikely anybody sells that either.

[edit] - After a little bit of searching i didn't find much about clear corner laws. Some states allow the signal to blink amber or white. But I'd make sure if you clear the lenses to get amber bulbs.

_________________

'93 SSE "Guinevere" RIP 1993 - 2019
'01 SSEi "Chloe" Mods: Intense FWI | GenV | WBS Intercooled | 3.2 MPS | 1.9 YT Rockers | SSAC Headers | N* TB | TEP Trans | 3.29 FDR | Torsen LSD
DTM Tuned | Dual AeroForce | Solid Mounts | 255 Walbro Pump | Fuel Logs | GXP STB & Sway Bars | CSS Lowering Springs | GXP Brakes | Disabled DRL
Magnaflow Mufflers | Magnaflow Cat | GXP Seats & Trim | 35 % Tint | Cleared & Tinted Tails | repinS Retrofited Morimoto Mini H1 | 19" GT500 Wheels
'09 G8 GT "Abigail" Mods: Rotofab | LS3 Heads, Intake & Cam | Kooks LT | Solo Exhaust | Tien Springs w/ GXP Struts | Whiteline Swaybars | BMR Subframe Connectors
Achievements: Guinevere - 264k mi | 16.27 @ 84.10mph | March '11 COTM :: Chloe - 223k mi | 13.85 @ 102mph | January '09 COTM :: Abigail - 192k mi | 12.85 @ 112mph

fronts are off ebay, rears can't be done becuase there molded into the lense.

_________________
-Juan

No bonnie!
93 s10 ex cab: 2.8: t5: exhaust: tbi mods. 5.3, 76mm, and a D.r cam on a stand

I know someone on here tinted the amber part on the rears red instead of clearing them and it came out sweet. you could also just tint the tails black.

_________________

2007 Grand Prix GT L32
Poly endlinks, swaybar bushings and dogbone bushings. Drop in high flow air filter. Its a start!

2009 Mitsubishi Eclipse GS (project BlackSheep) Bone stock for now, 5 spd and fun as hell! (Gf's Ride)
1996 Pontiac Bonneville SE Gone but not forgotten
1997 Dodge Ram Sport 4x4 5.9L The Beast!

dilcc

Thats my next appearance mod

_________________

2017 Cruze RS
2008 Aura - Totaled
Sold but never forgotten:
1998 Bonneville SE
1992 Bonneville SE

You need to have amber ones otherwise you'll get pulled over. Just use the link i sent you awhile back to get the clear corners. I've never seen CC's anywhere else so just use ebay. Seems like it would cost more for auto toyz to clear them then to just buy new ones(if you can even clear the stock)

_________________
gutted air box, autolite plugs, kenwood deck, boston 6x9's, exon bulbs, F body Walker muffler

Xbox Live calaeb08

Yep (see sig pic), and I'm still trying to figure out how I want to adjust the red sheet vinyl adhesive to be a tad darker red... Overall it looks great from about 5 feet but any closer and you can see a hint of a few tiny creases. It's all in how well you can apply it - the amber part of our tails have some relatively complicated curves. I've got another set of tails to play with and was thinking about spraying on some translucent red instead. Vinyl is 5 bucks and easily removable though too.

_________________

2012 Subaru WRX
Previously Owned 1997 40th SLE - Bonneville #1
Previously Owned 1999 SSEi