I got asked how I did the piece in the rear bumper, so here are a couple of the pictures I took.

first, with the bumper removed & upside down. I laid the fiberglass cloth in the area I wanted to mold & added the resin.
When it was dry, I took it out & trimed it to the shape I wanted. then added the fins (made out of foam board) & then added more fiberglass on top of it.
this is the result.


Kept on adding more layers of the cloth & resin to make it thiker & stronger.



After I was happy with the shape & the thikness. I added the filler & started sanding.

After lots of sanding & a few layers of the filler. I was mostly happy with the shape.


So I turned in to the pro. Where it got perfected & primered.


then painted.



& then I added it to the car.




I lerned a bunch from making this piece, like when you add more fiberglass to a thin piece, it tends to distort. So if you notice the fitment is not perfect. So I added the ruber trim from a Toyota Sequoia's fender flairs. It helped on the fitment a lot, & it makes it look more like a stock piece.

hope it helps.

_________________
2001 Blue SLE - 1995 Black SSE - 1988 Black GTA

i like it!!!!

_________________
-Juan

No bonnie!
93 s10 ex cab: 2.8: t5: exhaust: tbi mods. 5.3, 76mm, and a D.r cam on a stand

Very nice, your car is so awesome and unique

_________________
-Matt