It is currently Fri Sep 22, 2017 4:37 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: Replacement Decals
PostPosted: Mon Feb 15, 2016 1:41 pm 
Offline
Resident Gearhead
Resident Gearhead
User avatar

Joined: Mon May 19, 2008 10:30 pm
Posts: 8673
Location: Grand Rapids, Michigan
Year and Trim: 2000 Bonneville SSEi
Author - ddalder

Most of you have probably already figured out that attention to detail is very important to me. One problem I noticed over time is that my Tire and Loading Information decal started to lift at one corner. Of course my first thought was to head over to my local GM parts department and order a replacement. Well guess what... General Motors WILL NOT PROVIDE A REPLACEMENT FOR THIS DECAL. Instead they offer a letter with the information specific to the vehicle that can be kept in the glove box. My response... no thanks.

As you can see in the photo, GM actually did a pretty terrible job with these in the first place. The colours were not applied well and did not line up properly. Then there is the spelling error in the French text. Andrew (harofreak00) actually discovered this despite the fact that he is not French. The first line of text (at the top) should read "INFORMATION SUR LES PNEUS ET LA CHARGE" not "INFORMATION SUR LES PENUS ET LA CHARGE". Not sure how that one slipped past the proof stage!

Image

So I had Andrew create new artwork (he does fantastic work BTW) which I had professionally printed. Here's the new one:

Image

But that was just the start!

Many of you recall all the new options I've added over the years. Each is protected electrically with an appropriate fuse located in either the under hood or rear fuse block. As the final step in completing these mods, I felt it would be a great touch to update the fuse block decals accordingly. I put Andrew to work again and with artwork in hand, I was off to my local printing company. All the new decals are an adhesive backed, laminated product. I even purchased new fuse block covers to apply them to.

Those of you with a keen eye will notice on my under hood decal that I now have Fuse #43 HTD WSHR SYS (60A).

Image

The rear fuse block is where most of my new options have been connected and numerous changes were made here. You'll notice that like the under hood fuse block, each fuse location on the diagram is coloured appropriate to the standard case colour for the amperage rating. I'm not sure why GM did this in the front but not rear. No matter, mine is now consistent. New to this decal are:

Fuse #5 RRCAM (10A) - Rear View Camera System.
Fuse #9 HTDST LR (10A) - Heated Seat Left Rear.
Fuse #28 HTDST RR (10A) - Heated Seat Right Rear.
Fuse #32 TRK REL (5A) - Two Shot Trunk Release Circuit.
Micro Relay #42 RRCAM - Rear View Camera System.
Micro Relay #52 TRK REL - Two Shot Trunk Release Circuit.
Diode #80 - Heated Washer System

Image

One small inaccuracy... both state "PRINTED IN U.S.A.". This was to maintain consistency with the original decals provided by GM.

_________________
Black 2000 SSEi, HIR Headlights, Angel Eyes fogs, 3rd brake light overlay, hi-flo cat, 180 degree thermostat, HS 1.9 rockers, LSx yellow springs, Intense FWI, PCM, shift kit, push rods, and 3.4 Pulley. ZZP Power Log.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group


phpBB SEO