Okay, so an audio shop installed my alpine 136bt head unit and ran into issues. He used the PAC gm32r and swi rc steering wheel adaptor. He said "due to a special signal sent off from the stock radio, we couldn't hook up the steering wheel remote adaptor." I wasn't thrilled when he said we were using the gm32r but he says it'll work. So my question is, how do we get the remote adaptor to work? And what steps to take for that, because the radio is functional, but with no steering wheel controls, and I want them.

_________________
2002 Bonnie SSEI debadged and pieced together.
Daily Driver. 46,xxx original
Alpine 136bt
JX 360/4, Kenwood 6x9, infinity 6.5
Pdx 1.1000 on a W7 12"

1996 Viper GTS - The Rare Drive
11k miles

Autonetworkinc.com .... go buy something ;)

i dont see why they won't work. i used a metra steering wheel adaptor and it works with my kenwood HU on my 2000 SSEI. Now i do need to reprogram the controls on the adapter cause a couple of them don't work but my Mute, Seek up/down and Vol up/down all work... just not my Mode, preset and play buttons are currently inop.. the book tells me how to program they adaptor for the signals but i didnt take the time to do so.

S

_________________
Shane "RedZMonte"
2004 Z16 Z06: Virgin
2000 SSEi: Kenwood DDX512, 3.25" MPS, ZZP DP, PLog, Puck Mount, NGK TR7's, DHP Tuned
1995 Monte Z34: T04e "60" turbo, 42.5# injectors, Borla Catback, OBDII swap, DHP Tuned, Much more...

Figured out the head unit issue, taking it back to the store to get the steering wheel adaptor put in. Should be smooth sailing from here

_________________
2002 Bonnie SSEI debadged and pieced together.
Daily Driver. 46,xxx original
Alpine 136bt
JX 360/4, Kenwood 6x9, infinity 6.5
Pdx 1.1000 on a W7 12"

1996 Viper GTS - The Rare Drive
11k miles

Autonetworkinc.com .... go buy something ;)