Hey everyone....

Does anyone know if an 01 SSEi has a brake proportioning valve?

Thankx

Each caliper is controlled independently by the BPMV (Brake Pressure Modulator Valve), there is no external proportioning valve.

_________________
-Andrew-

2004 Bonneville GXP | White Gold Tricoat | custom built supercharged 3800 hot rod | garage queen
2014 Town & Country Limited | Cashmere Pearl | 52k | Family Hauler
2002 Ram 1500 Quad Cab Sport | Black| 230k | Official Bonneville Hauler

Thanks Haro.....

Does the BPMV act like the 'old' proportioning valve when you bleed brakes? The old proportioning valves could cut fluid flow if it 'sensed' a 'leak'.... I'm about to replace the Master Cylinder and while I'm at it I intend to replace the brake fluid so I just want to make sure there's not valve in the system to cut off the flow and make it more difficult.... I know, with the old proportioning valves, you could reset them if they 'tripped'.....but that's a pain I was hoping to avoid....

Thanks for the response....

I replaced my brake master twice, and just bled the brakes like normal afterwards with no extra steps required.

_________________
-Car Guy Carl
"Penelope" - 2003 SLE - 218k Miles
"Sydney" - 2000 Honda S2000 - 81k miles

Thanks for the response....I've never replaced the master on this car so I was wondering if that could cause an issue...good to hear it won't. I'm surprised that my master cylinder has lasted 20 years....Not bad...