It is currently Sat Nov 17, 2018 2:41 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Crank position sensor
PostPosted: Mon Jul 02, 2018 10:53 pm 
Offline
SLE Member
SLE Member

Joined: Thu Jul 26, 2012 7:36 pm
Posts: 97
Year and Trim: 2003 SLE 208,000 miles
2003 SLE 196,000 miles
So I am going to replace my CPS due to a no spark condition and have a couple questions? Does the balancer have threaded holes in it. I have pullers but do not see the threaded holes. I am also confused by the torque spec of 111 plus 75. Can someone explain this? 111 ft-lbs plus 75 degrees?


Top
 Profile  
 
PostPosted: Tue Jul 03, 2018 8:02 am 
Offline
Certified Bonneville Nut
Certified Bonneville Nut
User avatar

Joined: Mon May 10, 2010 6:11 pm
Posts: 8971
Location: Chicago, IL
Year and Trim: 2003 SLE
I do not believe you have threaded holes in the balancer, but you are correct on the torque spec.

_________________
-Car Guy Carl
"Penelope" - 2003 SLE - 180k Miles
"Sydney" - 2000 Honda S2000 - 59k miles
Image


Top
 Profile  
 
PostPosted: Tue Jul 03, 2018 9:23 am 
Offline
Administrator
Administrator
User avatar

Joined: Mon May 19, 2008 6:04 pm
Posts: 25342
Location: Browerville, MN
Year and Trim: 2004 GXP - plus a handful of other Bonnevilles
Yes their are threaded holes inside those slots, but the universal pulley kits don't usually have the correct thread bolts. You need 1/4"-28 (fine thread) x 4" long bolts.

This is the puller I use: https://www.amazon.com/Lisle-Harmonic-B ... B000P0XMKK

Image

_________________
-Andrew-
Image
2004 Bonneville GXP | White Gold Tricoat | custom built supercharged 3800 hot rod | garage queen
2005 Town & Country Limited | Butane Blue Metallic | 290k | Family Hauler
2002 Ram 1500 Quad Cab Sport | Black| 210k | Official Bonneville Hauler


Top
 Profile  
 
PostPosted: Tue Jul 03, 2018 9:30 am 
Offline
GXP Member
GXP Member

Joined: Thu Mar 31, 2011 8:57 pm
Posts: 236
Location: Muskego,Wisconsin
Year and Trim: 2000 SLE 2005 SLE
1975 Monte Carlo
What they are talking about is torque and angle.
The torque is 111 ft.lbs.(use torque wrench)
After reaching the 111 ft.lbs.pull (tighten) the bolt another 75 degrees.
In other words almost 1/4 turn more.
1/4 turn would be 90 degrees.


Top
 Profile  
 
PostPosted: Thu Jul 05, 2018 10:47 am 
Offline
SLE Member
SLE Member

Joined: Thu Jul 26, 2012 7:36 pm
Posts: 97
Year and Trim: 2003 SLE 208,000 miles
2003 SLE 196,000 miles
Thank for the info. Pulley is off so now just need to put back together. Used 14-20 bolts and still worked but it felt like I was wrecking threads. Should never use again. Hope this fixes the no start condition.


Top
 Profile  
 
PostPosted: Fri Jul 06, 2018 1:40 pm 
Offline
SLE Member
SLE Member

Joined: Thu Jul 26, 2012 7:36 pm
Posts: 97
Year and Trim: 2003 SLE 208,000 miles
2003 SLE 196,000 miles
CPS was the issue. Car all back together and running great so far. Only a few miles on it.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Related topics
 Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Crank Position Sensor and Cam Position Sensor

01bonneSC

0

869

Fri Nov 28, 2008 2:37 pm

01bonneSC View the latest post

There are no new unread posts for this topic. how do i change crank shaft position sensor

brandonSSEi

1

998

Sat Aug 29, 2009 12:39 am

Archon View the latest post

There are no new unread posts for this topic. Bad crank position sensor - turned blown intake manifold

mobil1

16

1925

Tue Nov 15, 2016 3:02 pm

redzmonte View the latest post

There are no new unread posts for this topic. ALC Position Sensor

Oldman

7

1616

Thu Jul 12, 2012 10:02 am

TheMannn View the latest post

There are no new unread posts for this topic. Crankshaft Position Sensor

bslayer

9

1330

Tue Feb 18, 2014 6:37 pm

Q-Ship View the latest post

 


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group


phpBB SEO