I'm getting set to do some work on my 01 SSEi that has been a long time coming, and wanted to ask if there is any particular order I should do the work. I'm going to replace my rack and pinion (difficult to turn right most of the time) tie rod ends (come with the new rack), the front struts including strut bearings and ball joints.

Recommendations?

Thanks!

Well, the tie rods mount to the steering rack and the knuckles that in turn mount to the ball joints and front struts. If you really don't want to do them all at the same time, do the rack and tie rods together, and the struts and ball joints together. The order really wouldn't matter. Either chunk would mean you'd need an alignment. You might be able to get the most out of an eyeballed alignment if you do the struts/ball joints first, then the rack and tie rods a little while later then get an alignment.

If you're asking where you should start if you're going to park yourself next to the wheelwell for several hours, I'd start with removing the lower strut mount bolts, then pop the tie rod off the knuckle, then the knuckle off the ball joint, then remove the ball joint and the strut (on both sides of the car) then get the rack out (no idea where to start there, haven't done it), get the new rack in, then struts and ball joints, then tie rods, then knuckle.

_________________

WHITE WHINE - 1992 SSE Supercharged 236.26 ci (.040 Over) 15.090 at 90.2 MPH on old engine w/ slipping trans & melted O2 sensor - Gen 3 M62 and matching TB, Gen 2 Pully, Zillamotorsports Ported LIM, YT 1.72 Roller Rockers, SII FPR & Injectors, Hypertech Thermomaster chip w/ 160 Thermo, TransGo Shift Kit, Infinity/Pioneer Speakers & a 10" Alpine Type R Sub, all the watts, 140 amp Alternator, Ricepipe CAI w/ heatshield, Pilot Angel Eye Foglights, Clear Corners, '02 17" Chrome Bent 5's, Magnaflow F-Body Muffler and Hi-flo Cat, Ceramic Coated Ported Exhaust Manifolds, Fan Override, Monroe Reflex struts, red calipers
2009 G8 GT - Sport Red Metallic, loaded, SOLO Axlebacks, Rotofab Intake, Tuned, autodim mirror, removed intake manifold cover, HSV GTS triple gauge pod, two tone red-hot shifter and HSV SuperSport steering wheel, GXP rear sway bar and diffuser, 3.45 diff and various Camaro suspension bits, LED Taillights