I just bought my 03 SSEi. The interior lights do not work. Tried the rear ones and the map lights. The door lights dont work either. Checked the fuses and the DIC. Any help is greatly appreciated.

_________________
03 SSEi, Intense Stage 1, KYB GR2 Struts, New interior thanks to harofreak00, Custom tint, Custom Black on Silver paint, 164K


TOTALED IN FLOOD. RIP

There could be a short with the lights in the mirrors in the visor. Either fix the visors or just disconnect them. There should be a blown fuse for this. Double check you fuses again.

_________________
Dan
2002 Pontiac Bonneville SLE 3.8L
2005 Chevy Trailblazer LT 4x4 4.2L
1991 Chevy K1500 4x4 5.7L

My wife has a 2002 SSEI and the interior lights keep going out. We tried changing the blown fuse a couple times and it would last for a day or two, then it would blow again. I've heard the mirror lights theory a few different times, and I'm going to try it. But, if that doesn't fix the problem, what would be the next logical step? I'm really trying to not waste my time chasing wires all over the place.

MINE TURNED OUT TO BE THE FUSE. I HAVENT USED THE VANITY MIRRORS SINCE SO SO FAR IT LOOKS LIKE THEY ARE TO BLAME. SORRY ABOUT THE CAPS. IM ON A WORK CPU ITS GOT THE CAPS LOCK ON FOR THE SCALE SYSTEM WE USE.
thanks nickmac

_________________
03 SSEi, Intense Stage 1, KYB GR2 Struts, New interior thanks to harofreak00, Custom tint, Custom Black on Silver paint, 164K


TOTALED IN FLOOD. RIP

but yet he signs without caps lol glad u got it fixed!

_________________
Member #3848
2002 Black Bonneville SE Sold But Not Forgotten
2002 White Bonneville SSEi Project car

I've got a lot of good info from this sight. I'm glad I could help someone else for a change.

_________________
Dan
2002 Pontiac Bonneville SLE 3.8L
2005 Chevy Trailblazer LT 4x4 4.2L
1991 Chevy K1500 4x4 5.7L

Putting a small 12volt bulb in place of the fuse, or solder the bulb across a blown fuse, may help to find the circuit the problem is in. Resistance of the bulb keeps current to a safe level. Disconnect things until the light goes out. Works best with a wiring diagram. If problem is intermittent, would have to wait until the light comes on to start.

Things that move tend to fatigue the attached wires. Moving/wiggling these things may make the light in the fuse panel switch on/off. Intermittent electrical problems can be a real pain.