Hi All

I finally have some time to finish up my front suspension. My question is what is the easiest way to remove the from sway bar? I tired it the other day but just didnt wanna come out.
Any ideas?


Thanks, Keith

_________________

2001 SSEi Bumbles
Angel Eyes ~ Cleared Corners ~ Tinted Tails ~ Intense FWI ~ 20% Tint ~ 180 Drilled T-Stat ~ GXP Brake & Suspension Upgrade ~ Alternator Rewire ~ Intense Shift Kit ~ Headers ~ Tr 6's

1992 Bonneville SSEi (Sold)
Fan over ride~NGK Tr 55's~180 Drilled t-stat~Clear Corners~Angel Eyes~Tinted Tails~Magnaflow Cat

Very simple. If you search around the forum, some say the easiest way is to do it on ramps with the wheels still on. I found that if you remove the tire, then the endlinks and finally the actual bar bushing it will come out very easily.

_________________


2009 Ford Flex 63K[/u] My DD & super utilitarian vehicle that we call the White Bus.
2006 Honda Accord EX V6 Coupe 73k; Wife's hot rod & highway ride.
SOLD: 2002 Bonneville SLE; 230K, Mods: Solid hockey puck front mount, Intense FWI intake, 180 degree thermostat, Magna Flow high-flow cat, ZZP O2 emulator: Nothing major but maintenance and what it takes to keep the dash lights off and the mileage up..
2004 Bonneville SLE 201k, Pearl White (Old man's ride)

I had mine on jack stands with both tires off and end links and bushings off also. Still didint wanna come out. I then took off my divers side brakes and hub and half shaft for more clearance and still no look. I think is was hitting my headers.

_________________

2001 SSEi Bumbles
Angel Eyes ~ Cleared Corners ~ Tinted Tails ~ Intense FWI ~ 20% Tint ~ 180 Drilled T-Stat ~ GXP Brake & Suspension Upgrade ~ Alternator Rewire ~ Intense Shift Kit ~ Headers ~ Tr 6's

1992 Bonneville SSEi (Sold)
Fan over ride~NGK Tr 55's~180 Drilled t-stat~Clear Corners~Angel Eyes~Tinted Tails~Magnaflow Cat