Hi all. I just replaced the radiator in my 2001 Bonnie and now the upper cooler line is pissing trans fluid at the fitting. It's a quick connect fitting with a spring clip in the fitting and a conical taper on the line with a yellow O ring looking thing behind the taper. I am wondering if there is supposed to be some kind of seal inside the radiator fitting that can fall out. It didn't start leaking until a day or two after I installed it. Anyone have any suggestions?

Just had this happen on another member's 03 SLE... It ended up being a combination of the spring clip and the o-ring inside the fitting. The new radiator should have come with new fittings, I would be wiiling to bet that's your problem.

_________________
Will
88 Cutlass Ciera Brougham International | 120k mi | White w/ Dk Claret Int. | Roller to be S2 L67/4T65E-HD | 1 of ~5100 3.8 FE3 Int'l series
91 Riviera | S2 L67 Swap/4T60E | 127K mi | Antelope Met. w/ Tan Int. | Saved From Death By Crusher
92 Bonneville SSE | L67/4T60E | 77K mi | Med Slate Grey w/ Two-Tone Grey Int. | Low Miles Time Capsule
92 Lumina Z34 | LQ1/4T60E | 177k mi | Torch Red w/Grey Int. | Rusty In Odd Spots
99 Tahoe LT | L31/4L65E | 276k mi | Spiral Grey Metallic w/Grey Int. | Truck for Truck Things and Portable Concert Hall
03 Park Avenue Ultra | 212K mi | White Diamond Met. w/ Shale Int. | Southern Time Capsule
05 Acura RL | 155K mi | Carbon Grey Pearl w/Ebony Int. | The Super-Hooptie Daily