Let me start off by saying Happy fathers day to all the fathers here on the forum. I have been having this problem with the a\c blowing cold & hard on the driver side, but warm and slow on the passenger and rear of the car. Ive been reading on other post that it could be the passenger air blend door actuator. If it is that, can someone point me to a post or tutorial on how to get to it. Also is there a way to just keep it open on closed temporially.

Thanks
Donovan

_________________

2000 SSEi 4th Pontiac!! 231,xxx Current mods: Gutted AirBox w/ K&N drop in. Cleared Corners. Future mods: 3.5 pulley, 180* tstat, hi flow cat, solid motor mounts, Red-Tinted Turn Signal Tails, Projector Headlights, Turn Signal Mirrors.

I hope this post by willwren is what you are looking for. - BC

willwren posted:
viewtopic.php?f=19&t=25745&p=262045&hilit=air+mix+door#p262045

_________________
In Memory of Brad - 1/21/1977 .. 10/23/2013 ...... Aaron - 1977 .. 2017 .....
2017 Hyundai Santa Fe Sport ..... 1992 Bonneville SSE 1SB 170 HP L27 4T60E retired/sold to MattStrike ..... 2005 Bonneville SE 1SC 205 HP L36 4T65E - retired/salvage yard ..... PBCF user 2321

I had the same problem a couple months ago. I found the best way to get to it was to remove the lower panel on the passenger side and to take the whole glove box and door out. Then the actuator is held on with 2 bolts.

There is a diagram in the link below
viewtopic.php?f=18&t=25317