So my plugs and wires needed changed as I would get a random misfire when it rained really bad. Well after the misfires started (before the wire and plug replacement) my car would start to stall out randomly. It was then it threw 2 codes. P0135 and P0141 for the 02 sensors. Not thinking too much of it I was still focused on the plugs and wires. So I replaced those and the problem of the stalling seemed to go away for a day or so. Then it started stalling again and after a little research realized the fuse for the 02 sensors had blown. So put a new fuse in and all seemed well for a few more days until it started stalling again. Now its getting frustrating when my car wants to keep stalling out. It only stalls on decelleration (is that right?) And doesn't seem to do it when breaking. So I bring this to you guys. Do I just need to replace the 02 sensors? Are they still causing my car to stall constantly? It hasn't thrown a code since I cleared the old ones (just disconnected the battery) so any help is appreciated!

Check the wiring to the oxygen sensor for any damage. Either way, if it has blown the fuse, I'd suggest replacing it. If it goes bad, it's supposed to go to default settings, which can be quite rich. If bad enough, it could cause your stalling problem.

_________________
*Gone, but not forgotten* - Black 2000 SSEi, HIR Headlights, Angel Eyes fogs, 3rd brake light overlay, hi-flo cat, 180 degree thermostat, HS 1.9 rockers, LSx yellow springs, Intense FWI, PCM, shift kit, push rods, and 3.4 Pulley. ZZP Power Log.