First i started it and the abs light had came on. Then today i started it and the trac- controll came on. I know there is a sensor that connects to the wheel hub. If that is what is wrong, then what is a good price to replace it.

_________________

2000 Bonneville Se. Supercharged, VS Cam, ZZP Headers, 1.0 PCM, 3.5 MPS, Billet Fuel Logs, Ported Supercharger, Machined intake, K+N Cold Air Insert, 3" Downpipe, Dual Glass paks, Maga Cat, 103 Autolite Cold Spark Plugs, 42.5 Injectors, Belden Wires, 20" EQUUS Chrome rims, Toyo ( Proxies ), Lund Hood Scoops, and Full Tint. Est 330 h.p.

New Mods --> 3250 Torque Converter, High Performance Race Clutches, Harden 4th Gear, and Shift Kit.

Check the wiring that goes to all 4 hubs. Take the connector off and inspect the terminals for corrosion.

_________________
Andrew - owner/operator of Bonnevilles Unlimited

2004 Bonneville GXP | 60k | White Gold Tricoat | custom built supercharged 3800 hot rod | garage queen
1997 Corvette | 55k | Silver Metallic | Z06 wheels | Date-night Hauler/Parts runner
2014 Town & Country Limited | Cashmere Pearl | 95k | Family Hauler
2002 Ram 1500 Quad Cab Sport | Black| 260k | Official Bonneville Hauler

check the fuse,i had same problem fuse was blown.

when you check the sensors, spray some electrical parts cleaner on them. Worked great for me.

_________________

2000 SE: 17" Chrome Grand Prix GTP wheels, Pirelli P-Zero Nero Rubber.
180,000 miles and running smooth

took the sensors off and spayed them down. lights still on and also the low-tire pressure light. What next ??

_________________

2000 Bonneville Se. Supercharged, VS Cam, ZZP Headers, 1.0 PCM, 3.5 MPS, Billet Fuel Logs, Ported Supercharger, Machined intake, K+N Cold Air Insert, 3" Downpipe, Dual Glass paks, Maga Cat, 103 Autolite Cold Spark Plugs, 42.5 Injectors, Belden Wires, 20" EQUUS Chrome rims, Toyo ( Proxies ), Lund Hood Scoops, and Full Tint. Est 330 h.p.

New Mods --> 3250 Torque Converter, High Performance Race Clutches, Harden 4th Gear, and Shift Kit.

You didn't find any corrosion on any of the hubs?

_________________
Andrew - owner/operator of Bonnevilles Unlimited

2004 Bonneville GXP | 60k | White Gold Tricoat | custom built supercharged 3800 hot rod | garage queen
1997 Corvette | 55k | Silver Metallic | Z06 wheels | Date-night Hauler/Parts runner
2014 Town & Country Limited | Cashmere Pearl | 95k | Family Hauler
2002 Ram 1500 Quad Cab Sport | Black| 260k | Official Bonneville Hauler

no. they were fairly clean. some guy i was talking to said that it could be a wheel speed sensor ?? idk

_________________

2000 Bonneville Se. Supercharged, VS Cam, ZZP Headers, 1.0 PCM, 3.5 MPS, Billet Fuel Logs, Ported Supercharger, Machined intake, K+N Cold Air Insert, 3" Downpipe, Dual Glass paks, Maga Cat, 103 Autolite Cold Spark Plugs, 42.5 Injectors, Belden Wires, 20" EQUUS Chrome rims, Toyo ( Proxies ), Lund Hood Scoops, and Full Tint. Est 330 h.p.

New Mods --> 3250 Torque Converter, High Performance Race Clutches, Harden 4th Gear, and Shift Kit.

It's a rather low level signal, the cleaner the connection, the better. Did they seem good and tight? If everything looks and feels good, then it is likely the wheel speed sensor has gone bad. You'll have to take it someplace that has a scanner that can read which wheel has the problem. Intense sells a good hub for around $100.

_________________
*Gone, but not forgotten* - Black 2000 SSEi, HIR Headlights, Angel Eyes fogs, 3rd brake light overlay, hi-flo cat, 180 degree thermostat, HS 1.9 rockers, LSx yellow springs, Intense FWI, PCM, shift kit, push rods, and 3.4 Pulley. ZZP Power Log.

i had a scaned by a friend and it said the right rear sensor. How much is a fair price for a rear hub?

_________________

2000 Bonneville Se. Supercharged, VS Cam, ZZP Headers, 1.0 PCM, 3.5 MPS, Billet Fuel Logs, Ported Supercharger, Machined intake, K+N Cold Air Insert, 3" Downpipe, Dual Glass paks, Maga Cat, 103 Autolite Cold Spark Plugs, 42.5 Injectors, Belden Wires, 20" EQUUS Chrome rims, Toyo ( Proxies ), Lund Hood Scoops, and Full Tint. Est 330 h.p.

New Mods --> 3250 Torque Converter, High Performance Race Clutches, Harden 4th Gear, and Shift Kit.

The rear hubs are more expensive than the fronts. RockAuto has decent prices, and Timken makes a good hub. I'd suggest not to just look for cheap, as they seem to use wheel speed sensors of lesser quality that may only last a few months, and you'll be right back to the same problem.

_________________
*Gone, but not forgotten* - Black 2000 SSEi, HIR Headlights, Angel Eyes fogs, 3rd brake light overlay, hi-flo cat, 180 degree thermostat, HS 1.9 rockers, LSx yellow springs, Intense FWI, PCM, shift kit, push rods, and 3.4 Pulley. ZZP Power Log.

There was another post about the whole rear ABS/WSS harness corroding and needs replacement of the whole thing. I know Haro had to do it on his. What im saying is it may not just be the hub.

Here it is....
viewtopic.php?f=18&t=10671

_________________