Hi

The passenger side window on my 98 SSE only moves in small increments, up & down. I have to release some minutes de button in order to move another increment.

Could it be the window motor ?

Thanks

If it moves at all, the motor is probably fine, but the glass itself (or its regulator mechanism) is binding up, so the motor cannot move it very far before it overloads and its thermal protector (like a circuit breaker that resets itself) cuts the power for a couple of minutes to allow the motor to cool.

I think you are going to have to open up the door and clean the window tracks and linkage, wherever it is binding up.

Does it help if you pull the window up by hand and press the up button?

_________________

WHITE WHINE - 1992 SSE Supercharged 236.26 ci (.040 Over) 15.090 at 90.2 MPH on old engine w/ slipping trans & melted O2 sensor - Gen 3 M62 and matching TB, Gen 2 Pully, Zillamotorsports Ported LIM, YT 1.72 Roller Rockers, SII FPR & Injectors, Hypertech Thermomaster chip w/ 160 Thermo, TransGo Shift Kit, Infinity/Pioneer Speakers & a 10" Alpine Type R Sub, all the watts, 140 amp Alternator, Ricepipe CAI w/ heatshield, Pilot Angel Eye Foglights, Clear Corners, '02 17" Chrome Bent 5's, Magnaflow F-Body Muffler and Hi-flo Cat, Ceramic Coated Ported Exhaust Manifolds, Fan Override, Monroe Reflex struts, red calipers
2009 G8 GT - Sport Red Metallic, loaded, SOLO Axlebacks, Rotofab Intake, Tuned, autodim mirror, removed intake manifold cover, HSV GTS triple gauge pod, two tone red-hot shifter and HSV SuperSport steering wheel, GXP rear sway bar and diffuser, 3.45 diff and various Camaro suspension bits, LED Taillights

Pulling or pushing the window let me move it.

With no help, the window moves aprox 3 inches in the begining, after that waiting about 1 minute let ne move less distance. If i dont wait i cant move it at all.