It is currently Fri Mar 29, 2024 12:48 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Wiring Harness
PostPosted: Tue Dec 04, 2018 12:27 pm 
Offline
SLE Member
SLE Member

Joined: Sat Nov 14, 2015 4:47 pm
Posts: 27
Year and Trim: 1994 Bonneville SE
1994 Bonneville

Had a small coolant leak around the water pump hose connections. Moved the wiring harness out of the way to gain access to the hose clamps for tightening. Forgot to move them back into place. Alternator cooling fan shredded the wires running down to the AC compressor and sensors on the engine left side :banghead:

Wires leading to ignition coil are intact. Can the wiring harness be replaced only for the AC and engine sensors? Any idea what part # this would be?


Top
 Profile  
 
 Post subject: Re: Wiring Harness
PostPosted: Tue Jul 14, 2020 2:55 pm 
Offline
SE Member
SE Member

Joined: Fri Jun 26, 2020 4:41 pm
Posts: 13
Year and Trim: 1999 Bonneville SSEi
I would just splice them back together using quality butt splices, heat shrink, electrical tape and maybe some added harness conduit.


Top
 Profile  
 
 Post subject: Re: Wiring Harness
PostPosted: Tue Jul 14, 2020 10:03 pm 
Offline
Certified Bonneville Nut
Certified Bonneville Nut
User avatar

Joined: Wed May 21, 2008 11:47 pm
Posts: 6871
Location: Philadelphia
Year and Trim: 95 SLE
So if it's the ignition module sub harness that's messed up, then yes, that can be replaced without replacing the whole engine harness.

Image

Problem is you'll be hard pressed to find one for a 92-94. A 95+ L36/L67 might be close enough to be plug and play since every connector is the same. Hit up http://www.bonnevillesunlimited.com/ for one if you want to give it a shot.

_________________
Image
95 SLE... a keeper. 241k miles. Low and Slow.
97 BMW 528i
98 Infiniti vq35'd i30: 13.3@104mph, 30MPG Hwy (RIP)
02 Jag X-type
03 BMW M5
05 Chevy Cobalt LS
07 Infiniti G35s 6MT (Sold)
07 Ducati Monster S2R 800 with DS1000 swap
83 Yamaha IT175K
72 Yamaha DS7: '74 RD250 swap, JL chambers

Info on dropping a 92-99: Here.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Related topics
 Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. TCC Valve is worn, can I disconnect the trans wiring harness

Tuffguy610

17

17279

Mon Jun 14, 2010 6:31 am

enslow View the latest post

There are no new unread posts for this topic. Anyone with 96 PCM harness pinout?

SSEiMan01

1

1010

Thu May 08, 2014 7:30 pm

SSEiMan01 View the latest post

There are no new unread posts for this topic. Wire up L67 using an L26 engine harness?

Sirayden

4

1210

Tue Apr 21, 2015 6:29 pm

95naSTA View the latest post

There are no new unread posts for this topic. Wire Harness Nightmare

bonnevilleCyborg

1

1258

Sat Apr 07, 2012 6:27 pm

sandrock View the latest post

There are no new unread posts for this topic. Attachment(s) 99 FSM info on A/C wiring

Bing

3

1490

Sat Jul 09, 2011 9:36 am

Bing View the latest post

 


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group


phpBB SEO