It is currently Wed May 23, 2018 2:48 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Tue Feb 13, 2018 6:16 am 
Offline
LE Member

Joined: Mon Feb 12, 2018 8:00 pm
Posts: 2
Year and Trim: 89 pontiac bonneville sse
1989 bonneville sse
No codes, no starting, nothing. just cranks. Mechanic said they ran all the tests they could and cant find anything. thats 2 different shops. Mechanic says he could get it to run for a few minutes then it would just die. Motor has less than 4000 miles on it. ecm is a replacement less than a month old. new manifold gaskets. Has fuel. has spark. No idea what the problem is. Vehicle has less than 98000 origional miles. well cared for i have all maintenance receipts etc.

Debating to sell it for 900 as interior is all leather etc. all in 9/10 condition as is body. or trying to take it to a dealership to see if they could figure it out. Any insight would be welcome.


Top
 Profile  
 
PostPosted: Tue Feb 13, 2018 6:46 pm 
Offline
Posts like an L67
Posts like an L67

Joined: Sun Aug 22, 2010 11:11 pm
Posts: 1490
Location: Ontario, Canada
Year and Trim: 2000 Bonniville SSEi L67
hi, welcome to the club!!

please use this to diagnose your issue and post your results pl......http://troubleshootmyvehicle.com/gm/3.8 ... ondition-1

_________________
poverty forces one to do unorthodox things

2000 SSEi
past rides:
1996 SSEi
1992 GTP
1987 Grand Am


Top
 Profile  
 
PostPosted: Tue Feb 13, 2018 6:58 pm 
Offline
Posts like an LN3
Posts like an LN3
User avatar

Joined: Fri Jun 24, 2016 12:15 am
Posts: 508
Location: Isanti, MN
Year and Trim: 2000 SLE Saved from the scrapyard.
new ECM, did you have to do a crank relearn with a scan tool with the new engine? The computer needs to determine the crank count with the CPS in order to set the timing for fuel and spark. I'm not as familiar with the OBD1 computers, but they are still fuel injected and need certain parameters in order to run right. I would call the dealer and ask them if the ECM has to be calibrated before it is put in your car in order for it to run. It might be something that simple, but something you don't have the capability to do.

_________________
A temporary fix does not exist. It becomes a solution until it needs to be fixed again.
Image
https://photos.google.com/album/AF1QipOYkkevV0gKTHc_8Cstuy8yS1Qyx6SiIKeTzuHy


Top
 Profile  
 
PostPosted: Tue Feb 13, 2018 11:32 pm 
Offline
Certified Bonneville Nut
Certified Bonneville Nut
User avatar

Joined: Tue May 27, 2008 8:53 am
Posts: 5301
Location: Las Cruces, NM
Year and Trim: 1993 Buick Park Avenue
1994 Buick Regal Custom
I don't believe OBD 1 has that functionality. If anything, that's all stored on the EPROM chip that would have been switched over.

If the crank position sensor is bad, or the ICM is bad and not passing the crank signal to the computer (or even wiring issue) it could cause the issues being described. If the computer doesn't know it's cranking, it won't know to do anything.

Are the injectors injecting? Have you verified fuel pressure is what it should be?

_________________
~Randall~
ImageImage

1993 Buick Park Avenue - 197k - Some odds and ends done - Simply won't die
1994 Buick Regal - 78k - Bone stock - Always ready for a good kicking
1990 Oldsmobile 88 - Gone to a better place


Top
 Profile  
 
PostPosted: Wed Feb 14, 2018 11:36 am 
Offline
Retired Admin/Techinfo Admin
Retired Admin/Techinfo Admin

Joined: Mon May 19, 2008 2:08 pm
Posts: 26004
Location: Space Coast, or at least it used to be
Year and Trim: 03 SLE, 95 SE, 95 TS SE
There is no crank learn or the like on these older ECM's... The ECM simply learns over time.. all of the basic info such as the tune are stored on the MEM-CAL Chip..

I agree with Randall, look at the crank sensor, ICM( Ignition Control Module )... Fuel pulse at the injectors and fuel pressure.. And as a last resort The ECM( I hate Aftermarket ECM's )


Top
 Profile  
 
PostPosted: Fri Feb 16, 2018 6:28 pm 
Offline
LE Member

Joined: Mon Feb 12, 2018 8:00 pm
Posts: 2
Year and Trim: 89 pontiac bonneville sse
Sorry i hadnt responded. Ill definitely check out that link. Heres a bit more detail about what i know. I bought the car thinking i would be able to fix it. for 500 dollars. Ive checked fuel and spark. Both are present. The car came with all paperwork from the day it was bought as its a 1 owner car and the guy kept good paperwork. 3 years ago the engine was replaced. I dont know why, it still has less than 3000 miles on it. Engine bay is spotless. As of 4 months ago he took it into the shop and the shop replaced manifold gaskets, spark plugs, wires, and the ECM. 2 days later he drove the car off the lot.
that same day the car went back in the shop for not running, they replaced the ECM again from manufacture warranty. He then took the car home.

I am unsure how long or exactly what issue showed itself. just that he parked the car in his garage and that was the end.
The dealership he was taking the car to went out of business at the time i purchased the car. I had the car taken to a mechanic who looked it over for about 4 hrs and couldnt figure out the issue. he confirmed fuel pressure. I had been unable to start the car as it would just crank and backfold at the manifold. When i did get it to start 1 time it was barely running and sounded and felt like it was about to die as it did. He says he got it to run off and on for 5 min. But he couldnt figure out the problem so he had another mechanic take it to his shop as they had the proper diag tools. The 2nd mechanic says he ran all diagnostics and nothing. No codes, everything looked fine. and now I have to get it towed home lol.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Related topics
 Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Intake manifold gasket

89bonnelmj

3

777

Sat May 15, 2010 4:15 pm

89bonnelmj View the latest post

There are no new unread posts for this topic. 89 SSE intake manifold gaskets/ turned into a crackedmanifol

yogidad

2

697

Wed Apr 22, 2015 5:10 pm

yogidad View the latest post

There are no new unread posts for this topic. 87 LE won't start

sandness

12

1379

Tue Oct 19, 2010 9:01 pm

horners87pa View the latest post

There are no new unread posts for this topic. Won't start or crank.

Paperweight

12

2912

Mon Sep 22, 2008 1:52 pm

clm2112 View the latest post

There are no new unread posts for this topic. car just wont start

pontiacsteve22

6

1212

Sun Mar 24, 2013 3:02 pm

MattStrike View the latest post

 


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group


phpBB SEO